Solar energy takes advantage to produce electricity, hot water, cooling and heating, making buildings energetically autonomous. it ensures a considerable cost saving in energy management and a sustainable energy supply for grid disconnect areas.Our Range of Products include the following:
Solar PV is used primarily for grid-connected/off-grid electricity to operate residential appliances, commercial equipment, lighting and air conditioning for all types of buildings. Through stand-alone systems and the use of batteries, it is also well suited for remote regions where there is no electricity source. Solar PV panels can be ground mounted, installed on building rooftops or designed into building materials at the point of manufacturing. (Available from size 50W to 300W)
A solar inverter, or PV inverter, converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. It is a critical component in a photovoltaic system, allowing the use of ordinary commercial appliances. Solar inverters have special functions adapted for use with photovoltaic arrays, including maximum power point tracking and anti-islanding protection. (Available from size 600W to 10kW)
A solar battery receives its energy from the sun or from some other light source through the use of photovoltaics. In most cases, a solar-powered battery is implanted in an electronic device and not capable of being removed. A solar battery is usually capable of fully charging after just an hour or two of exposure to sunlight. (Available from size 100AH to 500AH)
A charge controller, charge regulator or battery regulator limits the rate at which electric current is added to or drawn from electric batteries.  It prevents overcharging and may prevent against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining (“deep discharging”) a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. (Available from size 5AMP to 80AMP).
Female and male cable coupler MC4 MC4 photovoltaic connector is the world leading connector for the solar industry,with over 25 years of experience in reneawable energies Multi-Contact sets the tone with industry tested percision standards and creative options for all solar integration needs.
A solar lantern is a portable light fixture composed of an LED lamp, a photovoltaic solar panel, and a rechargeable battery. Outdoor lamps may have lamp, solar panel and battery integrated in one unit. Indoor solar lamps with separately-mounted solar panels are used for general illumination where centrally generated power is not conveniently or economically available. Solar-powered household lighting may displace light sources such as kerosene lamps, saving money for the user, and reducing fi re and pollution hazards. Solar lanterns recharge during the day. Automatic outdoor lamps turn on at dusk and remain illuminated overnight, depending on how much sunlight they receive during the day.
Solar garden lights are used for decoration, and come in a wide variety of designs. They are sometimes holiday-themed and may come in animal shapes. They are frequently used to mark footpaths or the areas around swimming pools. Some solar lights do not provide as much light as a line-powered lighting system, but they are easily installed and maintained, and provide a cheaper alternative to wired lamps.
Solar street lights provide public lighting without use of an electrical
grid; they may have individual panels for each lamp of a system, or
may have a large central solar panel and battery bank to power
To reduce the overall cost of a solar lighting system, energy saving
lamps of either the fl uorescent or LED lamp type are used, since
incandescent bulbs consume several times as much energy for a given
quantity of light.
(Available from size 3W to 100W)
Battery Interconnect Cable #4 AWG x 18” Battery interconnect cables with 3/8” lugs. MTW (Machine Tool Wire) rated and UL listed. Available in red or black
Wind power is the conversion of wind energy into a useful form of energy, such as using wind turbines to make electrical power, windmills for mechanical power, windpumps for water pumping or drainage, or sails to propel ships. Large wind farms consist of hundreds of individual wind turbines which are connected to the electric power transmission network. For new constructions, onshore wind is an inexpensive source of electricity, competitive with or in many places cheaper than fossil fuel plants. Small onshore wind farms provide electricity to isolated locations. Utility companies increasingly buy surplus electricity produced by small domestic wind turbines. Offshore wind is steadier and stronger than on land, and offshore farms have less visual impact, but construction and maintenance costs are considerably higher. Wind power, as an alternative to fossil fuels, is plentiful, renewable, widely distributed, clean, produces no greenhouse gas emissions during operation and uses little land. The effects on the environment are generally less problematic than those from other power sources. (Available from size 600W to Megawatt)
Solar water heating (SWH) or solar hot water (SHW) systems comprise
several innovations and many mature renewable energy technologies
that have been well established for many years.
In a “close-coupled” SWH system the storage tank is horizontally
mounted immediately above the solar collectors on the roof. No pumping
is required as the hot water naturally rises into the tank through
thermosiphon fl ow. In a “pump-circulated” system the storage tank is
ground- or fl oor-mounted and is below the level of the collectors; a
circulating pump moves water or heat transfer fl uid between the tank
and the collectors.
SWH systems are designed to deliver hot water for most of the year.
However, in winter there sometimes may not be suffi cient solar heat
gain to deliver suffi cient hot water. In this case a gas or electric booster
is normally used to heat the water.
(Available from size 100L to 300L)
Closed-circuit television (CCTV), also known as video surveillance is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. Surveillance of the public using CCTV is common in many areas around the world.
In recent years, the use of body worn video cameras has been introduced as a new form of surveillance, often used in law enforcement, with cameras located on a police officer's chest or head. Video surveillance has generated significant debate about balancing its use with individuals' right to privacy even when in public.
A more advanced form of CCTV, utilizing digital video recorders (DVRs), provides recording for possibly many years, with a variety of quality and performance options and extra features (such as motion detection and email alerts). More recently, decentralized IP cameras, some equipped with megapixel sensors, support recording directly to network-attached storage devices, or internal flash for completely stand-alone operation.